Grand Cherokee 2WD V6-3.7L (2008)
5. Engage the switch tab (1) on the rearward edge of the lens (2) between the overhead console and the switch plunger.
6. Position the pivots on both forward sides of the lens over the pivot pins in the lamp housing.
7. Using hand pressure over both lens pivots, press upward firmly and evenly until both pivots snap into place.
8. Reconnect the battery negative cable.
Bulb - Rear
BULB - REAR
CAUTION: Always use the correct bulb size and type for replacement. An incorrect bulb size or type may overheat and cause damage to the
lamp, the socket or the lamp wiring.
NOTE: The rear reading lamps are integral to the grab handle in the headliner on the inner roof side rail over each outboard rear seating
position.
1. Align the base of the bulb (1) with the bulb holder within the rear reading lamp housing.
2. Push the bulb into the holder until the base is fully seated.
