Grand Cherokee 2WD V6-3.7L (2008)
Fluid - A/T: Service and Repair
Transmission Fill - NAG1
TRANSMISSION FILL
To avoid overfilling transmission after a fluid change or overhaul, perform the following procedure:
1. Verify that the vehicle is parked on a level surface.
2. Remove the dipstick tube cap.
3. Add following initial quantity of Mopar(R) ATF +4, Automatic Transmission Fluid, to the transmission:
a. If only fluid and filter were changed, add 5.0 L (10.6pts.) of transmission fluid to transmission.
b. If the transmission was completely overhauled or the torque converter was replaced or drained, add 7.7 L (16.3 pts.) of transmission fluid to
transmission.
4. Check the transmission fluid See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Service and Repair/Procedures/Check Oil
Level - NAG1 and adjust as required.