Grand Cherokee 2WD V6-3.7L (2008)
Wheel Bearing: Service and Repair
Front Hub / Bearing - Installation
INSTALLATION
1. Install the hub bearing (3) to the knuckle.
2. Install the hub bearing to knuckle and the 3 bolts then tighten to 115 Nm (85 ft. lbs.).
3. Install the wheel speed sensor See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Wheel Speed Sensor/Service and
Repair/Front Wheel Speed Sensor - Installation.
4. Install the wheel speed sensor nut (2).
5. Install the brake rotor (1) See: Brakes and Traction Control/Disc Brake System/Brake Rotor/Disc/Service and Repair/Removal and
Replacement/Brake Rotor - Installation.