Grand Cherokee 2WD V6-3.7L (2008)
Memory Positioning Module: Testing and Inspection
Memory Seat Module
MEMORY SEAT MODULE
In order to obtain conclusive testing of the memory system, the Controller Area Network (CAN) data bus, and all of the electronic modules that provide
inputs to, or receive outputs from the memory system components must be checked. Any diagnosis of the memory system/module should begin with,
the use of a scan tool and the appropriate diagnostic service information.
Refer to the appropriate wiring information for complete circuit schematic or connector pin-out information.
NOTE: Vehicles equipped with the memory/heated seat option utilize a low voltage cut-off feature. This feature turns off the 12v power to the
power seat system anytime vehicle voltage is below 11.7v. Be certain to check the vehicle electrical system for proper voltage anytime the power
seat system appears inoperative.
Before any testing of the power seat system is attempted, the battery should be fully-charged.
