Grand Cherokee 2WD V6-3.7L (2008)
d.
Using a suitable flat bladed tool, depress the three retaining clips and lift the IPM straight up off of the bracket tabs (Figure 2).
e.
Lay the IPM on its side to expose the FCM Julian date code label (Figure 3).
3.
Inspect the Julian date code on the label located on the backside of the FCM (Figure 3).
CAUTION:
The FCM has two labels. One label is located on the front side of the FCM. The second label is located on the back side of the FCM between
the module electrical connectors. The Julian date code label to be inspected is located on the back (electrical connector) side of the FCM.
NOTE:
The Julian date is the 6th, 7th, and 8th character in the bottom row of numbers (Figure 3).
>
If the Julian date code is lower than 337 or higher than 339 the FCM does not require replacement. Continue with Step 15 of this
procedure.
