Grand Cherokee 2WD V6-3.7L (2008)
the sensor far enough to disengage the sensor from the bracket.
5. If the sensor bracket (1) is being replaced, carefully pry the fascia molding latch features away from the top and bottom tabs of the sensor bracket
far enough to disengage the sensor and bracket from the fascia as a unit.
6. If the sensor bracket is being replaced, carefully pry the sensor bracket latch features away from the top and bottom tabs of the sensor (3) far
enough to disengage the sensor from the bracket.
7. If the sensor or the sensor spacer (2) are being replaced, disengage the O-ring spacer from around the circumference of the sensor membrane
protrusion.
