Grand Cherokee 2WD V6-3.7L (2008)
-
Automatic Headlamps - For vehicles so equipped, the left multi-function switch control knob provides detent switching for the optional
automatic headlamps.
-
Front Fog Lamps - For vehicles so equipped, the left multi-function switch control knob provides detent switching for the optional front fog
lamps.
-
Headlamps - The left multi-function switch control knob provides detent switching for the headlamps.
-
Headlamp Beam Selection - The left multi-function switch control stalk provides detent switching for selection of the headlamp high or low
beams.
-
Headlamp Optical Horn - The left multi-function switch control stalk includes momentary switching of the headlamp high beam circuits to
provide an optical horn feature (sometimes referred to as flash-to-pass), which allows the vehicle operator to momentarily flash the headlamp high
beams as an optical signalling device.
-
Park Lamps - The left multi-function switch control knob provides detent switching for the park lamps.
-
Rear Fog Lamps - For vehicles so equipped, the left multi-function switch control knob provides detent switching for the optional rear fog
lamps. Rear fog lamps are optional only for vehicles manufactured for certain markets, where they are required.
-
Turn Signal Control - The left multi-function switch control stalk provides both momentary non-detent switching and detent switching with
automatic cancellation for both the left and right turn signal lamps.
The left multi-function switch also provides the vehicle operator with a control interface for the following interior lighting functions:
-
Interior Lamps Defeat - The left multi-function switch control ring provides detent switching to DEFEAT the illumination of all interior
courtesy lamps when a door, the rear flip-up glass, or the liftgate are opened.
-
Interior Lamps On - The left multi-function switch control ring provides detent switching to simultaneously illuminate all interior courtesy
lamps.
-
Panel Lamps Dimming - The left multi-function switch control ring provides simultaneous adjustable control of the illumination intensity of all
instrument panel lighting at one of five available illumination intensity levels.
-
Parade Mode - The left multi-function switch control ring provides detent switching for a PARADE mode that maximizes the illumination
intensity of all instrument panel lighting for visibility when driving in daylight with the exterior lamps turned ON.
The left multi-function switch cannot be adjusted or repaired. If any function of the switch is ineffective, or if the switch is damaged, the entire switch
unit must be replaced. The clockspring (with the multi-function switch mounting bracket), the left multi-function switch (with the SCM), the right
multi-function switch and the jumper wire harness are each available for separate service replacement.
