Grand Cherokee 2WD V6-3.7L (2008)
Power Window Switch: Service and Repair
Removal
REMOVAL
The driver and front passenger side power window switch is included in the window/lock switch. See: Sensors and Switches - Body and
Frame/Power Door Lock Switch/Service and Repair/Removal for the service procedures.
1. Disconnect and isolate the battery negative cable.
2. Remove the door trim panel See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Rear Door Panel/Service and Repair/Rear Door Trim
Panel - Removal.
3. Remove switch from door trim panel.
