Grand Cherokee 2WD V6-3.7L (2008)
5. Remove the screw (1) that secures the battery negative cable eyelet terminal (2) to the inner fender (3).
6. Unlatch and open the cover on the Power Distribution Center (PDC)(1) and Integrated Power Module (IPM)(2).
7. Remove the two nuts that secure the battery positive cable eyelet terminal to the B(+) terminal studs in the PDC.
8. Remove the nut that secures the battery positive cable eyelet terminal to the B(+) terminal stud in the IPM.
9. Remove both battery positive cable eyelet terminals from the B(+) terminal studs in the PDC and IPM.
