Grand Cherokee 2WD V6-3.7L (2008)
6. Remove the nut and bolt from the front of the lower control arm.
7. Remove the rear bolts (2) and flag nuts (3) from the lower control arm (1).
8. Remove the lower control arm from the vehicle.
Front Lower Control Arm - Installation
INSTALLATION
1. Position the lower suspension arm into the cradle.
2. Install the rear bolts (2) and flag nuts (3) to secure the lower control arm (1) to the frame, Tighten the bolts (3) to 88 Nm (65 ft lbs).
3. Install the nut and bolt for the front of the lower control arm Tighten to 169 Nm (125 ft lbs).
NOTE: Orientation of the flag bolt is critical Flag and head of the bolt (7) must be installed on the forward side of the lower control arm.
