Grand Cherokee 2WD V8-318 5.2L VIN Y MFI (1994)
Antenna Coaxial Cable Connector - Typical
8. Locate the antenna coaxial cable connector near the junction block at the right cowl side panel. Unplug the connector by pulling it apart while
twisting the metal connector halves. Do not pull on the cable.
9. Remove the antenna body and cable by pulling the cable and grommet out of the cowl side panel from inside the right front fender wheel housing.
10. Reverse the removal procedures to install. Tighten the antenna cap nut to 7.9 N.m (70 in. lbs.).