jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Door Sensor/Switch (For Alarm)|Description and Operation|Page 5413 > < Door Sensor/Switch (For Alarm)|Description and Operation
Page 1
background image

Door Sensor/Switch (For Alarm): Service and Repair

REMOVAL

1. Remove screw from demister opening at front of door.
2. Remove screw and door handle cover.
3. Remove screw from under armrest.
4. Remove screw from bottom of hand hold in armrest.

Trim Panel Removal

5. Remove the trim panel with a wide flat blade tool. To aid in removal of the trim panel, start at the bottom of the panel.
6. Remove the plastic water dam sheet.

Door Sensor/Switch (For Alarm)|Description and Operation|Page 5413 > < Door Sensor/Switch (For Alarm)|Description and Operation