Grand Cherokee 2WD V8-318 5.2L VIN Y MFI (1994)
Door Disarm Switch
7. Remove the U-clip holding the lock cylinder and disarm switch.
8. Pull the lock cylinder out of the door.
9. Pry the door disarm switch off the back of the lock cylinder.
10. Remove harness clip from door sheet metal.
11. Unplug the harness connector and remove the switch.
INSTALLATION
1. Push the door disarm switch onto the lock cylinder.
2. Install lock cylinder in door with U-shaped clip.
3. Connect harness and fasten clip to door.
4. Install door trim panel.
5. Install linkage and control panel.
