jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Interior Moulding / Trim|Service and Repair|Page 6060 > < Drive Line - Vibration at 2,400 Rpm|Page 6055
Page 1
background image

Carpet: Service and Repair

FRONT CARPET/MAT REMOVAL

1. Remove lower B-pillar trim panels.
2. Remove front and rear seats (as applicable).
3. As necessary, remove trim panels and moldings.
4. Remove floor console.
5. Remove all other interfering components.

Front Carpet & Mat

6. Remove carpet and mat from floor panel.
7. For installation, reverse removal procedure.

CARGO CARPET/MAT REMOVAL

1. Remove quarter trim panels.
2. Remove retaining screws, and liftgate trim panel.

Cargo Tie-Down Footman Loop

3. Drill-out retaining rivet heads and remove cargo tie-down footman loops from carpet.
4. Remove rear seats and belts.
5. As necessary, remove trim panels and moldings.
6. Remove all other interfering components.

Interior Moulding / Trim|Service and Repair|Page 6060 > < Drive Line - Vibration at 2,400 Rpm|Page 6055