jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

All Technical Service Bulletins for Seat Back: > < Diagram Information and Instructions|Page 6243
Page 1
background image

Seat Back: Customer Interest
Front Seat Back Pivot - Knocking Noise

NO: 23-70-94

GROUP: Body

DATE: Oct. 21, 1994

SUBJECT:
Knocking Noise from the Front Seat Back Pivot

THIS BULLETIN SUPERSEDES TECHNICAL SERVICE BULLETIN NUMBER 23-45-93 DATED AUG. 6, 1993. PLEASE NOTE TO REFER TO
THIS BULLETIN WHEN THE SYMPTOMS ARE ENCOUNTERED. THE REVISION ADDS A REVISED SEAT PIVOT BOLT INSTEAD OF
THE SPACER USED PREVIOUSLY, AND IS EXPANDED TO INCLUDE 1994 VEHICLES.

MODELS:

1993 - 1994 (ZJ) Grand Cherokee/Grand Wagoneer

SYMPTOM/CONDITION:

Knocking noise heard from the front seat back when driving over rough road surfaces.

DIAGNOSIS:

Inspect the seat back for any side-to-side looseness. If the condition is present, perform the repair procedure.

PARTS REQUIRED:

1

4797554

Pivot Bolt

REPAIR PROCEDURE:

This bulletin involves installing a revised seat pivot bolt to eliminate play in the seat.

1.

Remove the pivot bolt from the seat.

2.

Install pivot bolt, P/N 4797554.

POLICY: Reimbursable within the provisions of the warranty.

TIME ALLOWANCE:
Labor Operation No.

23-20-41-94

0.2 Hrs.

FAILURE CODE: P8 - New Part

All Technical Service Bulletins for Seat Back: > < Diagram Information and Instructions|Page 6243