Grand Cherokee 2WD V8-318 5.2L VIN Y MFI (1994)
Fig. 12 Rear Caliper Piston Dust Boot Installation
4. Seat dust boot in caliper by hand or with a suitable installer tool as shown, then press piston to bottom of bore.
Fig. 13 Rear Caliper Mounting Bolt Bushing Boot Position
5. Install caliper bleed screw and bushing and boot assemblies. Ensure boots are centered in caliper bores as shown.
6. Install mounting bolt bushings in boots with boot lips seated in bushing end grooves.
7. Install brake pads as outlined under Brake Pad/Service and Repair.