Grand Cherokee 2WD V8-318 5.2L VIN Y MFI (1994)
Driver/Vehicle Information Display: Description and Operation
Controls
Controls
-
The SET button, when depressed for 2 seconds, initiates the time-setting mode. Once in the time-setting mode, pressing the SELECT button will
cause the VIC to step to the next time/day function.
-
Momentarily pressing the SELECT button, then the SET button for 2 seconds, will reset the service reminder back to service interval selected in
set-up mode.
At ignition ON, the module will display the distance-to-service message. If the distance-to-service is 0, 11 seconds after the display turns on, the
module will beep a set of 6 beeps. Pressing SELECT, then SET will reset the service reminder back to the service interval.
-
If the time/date has been set, pressing SELECT displays the service reminder.
-
After ignition ON and the service reminder has been displayed, pressing SET for 2 seconds initiates the time/date setting mode.
-
If the module has lost battery power, the clock/calendar display will flash the next time the ignition switch is turned ON or a button is pressed with
the ignition OFF. The time display will continue to flash until the time is set.
-
If both SELECT and SET buttons are depressed at ignition ON, the VIC will enter the self-test mode.
If SET and/or SELECT is pressed with ignition OFF, the module will display the clock/calendar. This display will remain for the time the
button(s) is/are pressed, plus 6 seconds.
