jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Door Ajar Switch - Snapping or Popping Noise|Page 6584 > < Door Ajar Switch - Snapping or Popping Noise|Page 6578
Page 1
background image

Door Switch: All Technical Service Bulletins
Door Ajar Switch - Snapping or Popping Noise

NO: 08-60-94

GROUP: Electrical

DATE: Oct. 28, 1994

SUBJECT:
Snapping Or Popping Noise When Door is Opened - Sticking Door Ajar Switch

MODELS:

1994 - 1995 (ZJ) Grand Cherokee

SYMPTOM/CONDITION:

An intermittent loud snapping or popping noise is heard when the door latch button is operated. The noise is often confused with latch or linkage
problems but is caused by a momentary sticking and the releasing of the door ajar switch.

DIAGNOSIS:

Open and close the door several times. If the noise is heard, perform the repair procedure.

PARTS REQUIRED:

A/R

56007300

Door Ajar Switch

REPAIR PROCEDURE:

This bulletin involves replacing the door ajar switch.

1.

Remove the door ajar switch using care to assure that the harness does not become disconnected and fall into the body.

2.

Disconnect the switch from the harness.

3.

Install the new switch. The switch will self adjust when the door is closed.

POLICY:
Reimbursable within the provisions of the warranty.

TIME ALLOWANCE:
Labor Operation No:

08-80-88-91

0.2 Hrs.

Door Ajar Switch - Snapping or Popping Noise|Page 6584 > < Door Ajar Switch - Snapping or Popping Noise|Page 6578