jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Metal Quick Connect Fittings|Page 2754 > < Metal Quick Connect Fittings|Page 2752
Page 1
background image

Fuel Supply Line: Description and Operation
Single TAB Type Fittings

CAUTION:  The fuel system remains pressurized after engine has been shut off. Release system pressure prior to opening system. 

WARNING:  Gasoline is extremely volatile, when servicing fuel systems always wear eye protection, keep open flame away from fuel system
components, and prohibit smoking in service areas.

NOTE:  Wrap shop towels around fuel hoses to absorb any fuel that spills during fuel tank replacement

Quick Connect Fitting Assembly/Disassembly (Except Chassis Fuel Tubes)

REMOVAL (MANUAL)

1. Bend the retainer tabs down.
2. While pulling up on the underside of the retainer tab, push the legs of the retainer clip away from each other.
3. Raise the pull tab until the hooks on the legs of the retainer clip clears the fuel tube.
4. Pull fuel tube out of the Quick-Connect fitting.
5. Check the connector body and retainer for damage. Replace if necessary.

Metal Quick Connect Fittings|Page 2754 > < Metal Quick Connect Fittings|Page 2752