Grand Cherokee 2WD V8-318 5.2L VIN Y MFI (1994)
11. Remove annulus gear from output shaft. Use rawhide or plastic mallet to tap gear off shaft.
GEAR CASE AND PARK LOCK DISASSEMBLY
1. Remove locating ring from gear case.
2. Remove park pawl shaft retaining bolt and remove shaft, pawl and spring.
3. Remove reaction plug snap ring and remove reaction plug.
4. Remove output shaft seal.
Assembly
GEAR-TRAIN AND DIRECT CLUTCH ASSEMBLY
1. Soak direct clutch and overdrive clutch discs in Mopar (R) ATF Plus 4 transmission fluid. Allow discs to soak for 10 - 20 minutes.
2. Install new pilot bushing and clutch hub bushing in output shaft if necessary. Lubricate bushings with petroleum jelly, or transmission fluid
3. Install annulus gear on output shaft, if removed. Then install annulus gear regaining snap ring.
