jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Valve Body, A/T|Removal and Installation|Page 3557 > < Valve Body, A/T|Removal and Installation|Page 3555
Page 3
background image

14. Check and adjust front and rear bands if necessary.
15. Connect solenoid case connector wires.
16. Install oil pan and new gasket. Tighten pan bolts to 17 Nm (13 ft. lbs.) torque.
17. Lower vehicle and fill transmission with Mopar ATF Plus 4, type 7176 fluid.
18. Check and adjust gearshift and throttle valve cables, if necessary.

Valve Body, A/T|Removal and Installation|Page 3557 > < Valve Body, A/T|Removal and Installation|Page 3555