Grand Cherokee 2WD V8-4.7L Flex Fuel (2008)
1. Using a trim stick C-4755 or equivalent, disengage the retaining tabs that secure the upper liftgate trim panel to the retaining clips in the liftgate
opening and remove the trim panel.
Header Molding - Installation
INSTALLATION
1. Align the retaining tabs on the upper liftgate trim panel with the retaining clips in the liftgate opening and engage the retaining tabs that secure the
trim panel to the liftgate opening.
Load Floor - Removal
REMOVAL
1. Remove the liftgate scuff plate, See: Scuff Plate/Service and Repair/Liftgate Sill Scuff Plate - Removal.
2. Remove the two nuts that secure the load floor to the floor panel.
3. Remove the load floor.
Load Floor - Installation
INSTALLATION
1. Position the load floor in the vehicle.
2. Install the two nuts that secure the load floor to the floor panel.
3. Install the liftgate scuff plate, See: Scuff Plate/Service and Repair/Liftgate Sill Scuff Plate - Installation.
Removal
REMOVAL
1. Using a small flat-bladed tool, carefully open the two fastener covers located in the A-pillar trim panel.
2. Remove the two bolts that secure the A-pillar trim panel to the A-pillar and remove the trim panel.
