Grand Cherokee 2WD V8-4.7L Flex Fuel (2008)
2. Position the rear passenger seat cushion to gain access to the bolt (3) that secures the rear outboard seat belt lower anchor and the rear seat back
bracket to the rear floor panel.
3. Loosen the bolt (3) that secures the rear outboard seat belt lower anchor and the rear seat back bracket to the rear floor panel.
4. Disengage the lower anchor from the loosened bolt.
5. Remove the trim plug (1) from the upper c-pillar trim.
CAUTION: The upper trim plug must be removed and discarded to gain access to the upper retaining screw before attempting to remove
the trim panel. Failure to remove the trim screw may result in damage to the trim panel or the retaining clip.
6. Using a small drill (2) approximately 3 mm (7/64"), drill a hole into the trim plug (1).
