Grand Cherokee 2WD V8-4.7L Flex Fuel (2008)
3. Position the flange on the quarter trim panel into the seal ditch and secure the bottom clip first and then the middle clip.
4. Align the two fastener holes in the quarter trim panel with the two fastener holes in the quarter panel and engage the retaining tabs that secure the
quarter trim panel to the quarter panel.
5. Install the two screws that secure the quarter trim panel to the quarter panel.
6. Install the load floor, See: Load Floor - Installation.
7. Install the D-pillar trim panel, See: Pillar Trim/D-Pillar Trim/Installation.
8. Install the upper liftgate trim panel, .
9. Install the liftgate scuff plate, See: Scuff Plate/Service and Repair/Liftgate Sill Scuff Plate - Installation.
10. Position the locating tabs on the bottom of the upper C-pillar trim panel into the slots in the top of the quarter trim panel.
11. Align the retaining tabs on the upper C-pillar trim panel with the retaining clips in the C-pillar and engage the retaining tabs that secure the trim
panel to the C-pillar.
