jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Sunroof / Moonroof Panel > < Cover-Guide Mechanism|Page 10812
Page 1
background image

Sunroof / Moonroof Interior Trim Panel: Service and Repair
Trim Lace

Removal

REMOVAL

1. Remove trim lace (2) by holding one end of the trim lace at the butt joint and pulling horizontally into the opening until lace is completely loose

from the headliner/sunroof joint.

Installation

INSTALLATION

1. Place butt joint of trim lace into position starting at the drivers side middle of the opening at the butt joint notch in the u-frame.
2. Push lace into position.
3. Ensure that the corner radii is fully engage.
4. Once the trim lace is attached to sunroof module using a trim stick C-4755 or equivalent, begin tucking the headliner under the lip on the trim lace

working all the way around the opening. When installing a new trim lace, begin tucking the headliner under the lip as the tear cord (1) is removed
working all the way around the opening.

Sunroof / Moonroof Panel > < Cover-Guide Mechanism|Page 10812