Grand Cherokee 2WD V8-4.7L Flex Fuel (2008)
3. Remove the seat cushion and pan See: Seat Cushion/Service and Repair/Seat Cushion / Cover - Removal.
4. Disconnect the motor electrical connector.
5. Remove the fasteners (1) holding the motor (3) to the seat adjuster (2).
6. Remove screw and washer from the motor shaft.
7. Remove motor (3) from seat adjuster (2).
Installation
INSTALLATION
WARNING: A seat structure that has seen significant load may have the locking mechanism activated and may exhibit the following symptoms:
-
Locking pawl (2) loose
-
Locking pawl (2) engaged into the seat frame sidemember (1)
-
Height adjuster only works on outboard side
