Grand Cherokee 2WD V8-4.7L Flex Fuel (2008)
Parking Brake Backing Plate: Service and Repair
Installation
INSTALLATION
1. Install support plate on axle flange. Tighten attaching bolts (3) to 115 Nm (85 ft. lbs.).
2. Install parking brake cable in the brake actuator lever (4).
3. Install the park brake shoes (1)See: Parking Brake Shoe/Service and Repair/Removal and Replacement/Brake Shoes - Installation.
4. Install axle shaft (1), See: Transmission and Drivetrain/Drive Axles, Bearings and Joints/Axle Shaft Assembly/Axle Shaft/Service and Repair/Rear
Axle - C213R/Installation.
