Grand Cherokee 2WD V8-4.7L Flex Fuel (2008)
Vacuum Brake Booster: Service and Repair
Power Brake Booster - Installation
INSTALLATION
1. Check condition of grommet that secures check valve in booster. Replace grommet if cut, torn, or loose.
2. Install new booster dash seal.
3. Align and position booster in the mounting holes (2) of the dash panel.
4. Inside the vehicle, lubricate pedal pin with Mopar multi-mileage grease.
5. Install booster attaching nuts (3) on studs. Tighten attaching nuts to 39 Nm (29 ft. lbs.).
