Grand Cherokee 2WD V8-4.7L Flex Fuel (2008)
NOTE: If the seal on any air door is deformed or damaged, the air door must be replaced.
20. Remove the upper defrost/panel-air door (1), lower defrost/panel-air door (2), directional vane (3) and the blend-air door (4) from the left side air
distribution housing (5) as required.
Air Inlet Housing
HOUSING-AIR INLET
NOTE: The air inlet housing must be removed from HVAC housing and disassembled for service of the recirculation-air door.
NOTE: LHD model shown. RHD model similar.
1. Remove the air inlet housing (1) from the HVAC housing and place it on a workbench See: Removal and Replacement/HVAC Housing - Removal
2. Remove the two screws (2) that secure the recirculation door actuator (3) to the air inlet housing and remove the actuator.
NOTE: If the foam seal on the recirculation-air door or the air inlet housing is deformed or damaged, it must be replaced.
3. Carefully remove the recirculation-air door (4) from the air inlet housing.
HVAC Housing
HOUSING-HVAC ASSEMBLY
NOTE: The HVAC housing must be removed from the vehicle and disassembled for service of the A/C evaporator.