jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Removal and Replacement|Page 8476 > < Removal and Replacement|Page 8474
Page 7
background image

1. Install the upper defrost/panel-air door (1), lower defrost/panel-air door (2), directional vane (3) and the blend-air door (4) into the left side air

distribution housing (5) as required. Align the air doors with the pivot shaft holes in the housing.

2. Install the upper defrost/panel-air door (1), lower defrost/panel-air door (2), directional vane (3), rear outlet-air door (4) and the blend-air door (5)

into the right side air distribution housing (6) as required. Align the air doors with the pivot shaft holes in the housing.

3. If removed, align the front floor-air doors (1 and 3) with each other and install then into the center partition (2). Make sure that the air door

retaining tabs (4) are fully engaged.

Removal and Replacement|Page 8476 > < Removal and Replacement|Page 8474