Grand Cherokee 2WD V8-4.7L Flex Fuel (2008)
1. Disconnect and isolate the battery negative cable.
2. If equipped, remove the cover from over the top of the front lamp unit. See: Service and Repair/Front Lamp Unit - Removal.
3. Disconnect the pigtail wire connector from the connector receptacle integral to the low beam (2) or high beam (1) bulb base on the back of the
front lamp unit housing (5).
4. Firmly grasp the bulb base and rotate it counterclockwise about 30 degrees to unlock it.
5. Pull the bulb and base straight out from the keyed opening in the reflector.