Grand Cherokee 2WD V8-4.7L Flex Fuel (2008)
Trunk Light Bulb: Service and Repair
Liftgate Lamp Bulb - Removal
BULB
1. Disconnect and isolate the battery negative cable.
2. Remove the lamp (3) from the liftgate trim panel. See: Service and Repair/Liftgate Lamp - Removal.
3. Using a small thin-bladed screwdriver, gently pry the latch features of the lamp lens (5) away from the lamp housing and remove the lens from the
housing.
4. Pull the base of the bulb (4) straight out of the bulb holder within the lamp housing.
