Grand Cherokee 2WD V8-4.7L Flex Fuel (2008)
Power Steering Pump: Service and Repair
Power Steering Pump - Installation
3.7L & 4.7L
1. Install pulley on pump if removed See: Power Steering Pump Pulley - Installation.
2. Install 3 pump mounting bolts (1) and tighten to 28 Nm (21 ft. lbs.).
3. Install the drive belt,See: Engine, Cooling and Exhaust/Engine/Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and
Repair/Accessory Drive Belt - Installation.
4. Install the pressure hose on the pump and tighten the nut to 28 Nm (21 ft. lbs.).
5. Install the cooler return hose at the reservoir.
6. Add power steering fluid,See: Power Steering Bleeding/Service and Repair.
