Grand Cherokee 2WD V8-4.7L Flex Fuel (2008)
1. Position the upper suspension arm (2) in the frame rail bracket.
2. Install the mounting bolt (7) and nut (1) tighten to 129 Nm (95 ft. lbs.).
3. Position the upper suspension arm (4) in the axle bracket.
4. Install the mounting bolt (3) and nut (2) tighten to 136 Nm (100 ft. lbs.).
5. Remove the supports and lower the vehicle.
Left Side
LEFT SIDE
1. Raise the vehicle and support the rear axle.
2. Remove the fuel tank See: Powertrain Management/Fuel Delivery and Air Induction/Fuel Tank/Service and Repair/Fuel Tank - Removal.
3. Remove the lower suspension arm nut (2) and bolt (1) from the axle bracket.
