Grand Cherokee 2WD V8-4.7L Flex Fuel (2008)
Stabilizer Bushing: Service and Repair
Front
Removal
STABILIZER BAR TO FRAME BUSHING
1. Raise and support the vehicle.
2. Remove the front splash shield.
3. Remove the two stabilizer bar retainer bracket bolts (2).
4. Remove the bushing clamp (2).
5. Remove the stabilizer bar bushing (3).
Installation
STABILIZER BAR TO FRAME BUSHING
1. Install the stabilizer bar bushing (3) to the bar (1).
2. Install the stabilizer bar bushing retainer bracket (2) bolts and tighten the two mounting bolts.
3. Install the front splash shield.
4. Lower the vehicle.