Grand Cherokee 2WD V8-4.7L VIN J (2004)
Pedal Positioning Motor: Service and Repair
PEDAL MOTOR
REMOVAL
1. Disconnect the negative battery cable.
2. Remove the cluster bezel.
3. Remove the steering column opening cover.
4. Remove the two mounting screws.
5. Disconnect the electrical connector.
6. Remove the adjustable pedal motor.
INSTALLATION
1. Install the adjustable pedal motor.
2. Reconnect the electrical connector.
3. Install the two mounting screws.
4. Install the steering column opening cover.
5. Install the cluster bezel.
6. Reconnect the negative battery cable.