Grand Cherokee 2WD V8-4.7L VIN J (2004)
9.
Launch the computer Benchtop Programmer/DRBIII(R) Winflash II application.
10.
Click on the computer Mode menu and select DRBIII(R) Winflash. The DRBIII(R) Winflash II application should display the following words in
green, "DRB Connected".
11.
Click the Internet Download button
12.
The BCM flash update will be displayed on the Web Download dialog box. Click the Download button to send the BCM file to the DRBIII(R).
13.
Connect the DRBIII(R) to the vehicle and select Vehicle Flash (Option 7) from the DRBIII(R) Main Menu.
14.
Carefully follow the instructions on the DRBIII(R) screen and complete the BCM reprogramming process. Power down the BCM by turning the
ignition switch to the OFF position.
15.
Cycle the ignition key from the OFF to the RUN positions at least two (2) times to allow the BCM to learn.
16.
Proceed to step # 26.
Method 2: ISIS CD-ROM
17.
Using ISIS CD (February 2004) or later series, reinstall or upgrade the existing Benchtop Programmer/DRBIII(R) Winflash II application on the
computer.
Refer to the installation and user's guides on the ISIS CD-ROM under the Software Help folder for additional assistance.
18.
Launch the computer Benchtop Programmer/DRBIII(R) Winflash II application.
19.
Click on the computer Mode menu and select DRBIII(R) Winflash. The DRBIII(R) Winflash II application should display the following words in
green, "DRB Connected".
20.
Either enter the BCM part number (preferred and obtained earlier), or use the following criteria to select the flash from the drop down list:
a.
Select 2003 or 2004 Model Year.
b.
Select WG Body Style.
c.
Select Engine.
NOTE:
The preferred method to select the correct software is by entering the current BCM part number into the ISIS Benchtop Programmer/DRBII(R)
Winflash II application.
21.
Select the desired BCM Flash update, BCMWJGV047 - Version of 4.7 or later, from the table grid list on the computer.
22.
Click the CD Download button on the computer to send the file to the DRBIII(R).
23.
Connect the DRBIII(R) to the vehicle and select Vehicle Flash (Option 7) from the DRBIII(R) Main Menu.
24.
Carefully follow the instructions on the DRBIII(R) screen and complete the BCM reprogramming process. Power down the BCM by turning the
ignition switch to the OFF position.
25.
Cycle the ignition key from the OFF to the RUN positions at least two (2) times to allow the BCM to learn.
26.
Reset country code setting in the BCM.
a.
The country code setting is available in the DRBIII(R) Standalone Menu / 1998 - 2004 Diagnostics / Body Menu / Miscellaneous Menu.
Perform this operation even if the current country code is correct.
b.
Cycle the ignition key at least twice, from OFF to RUN, to allow the BCM to learn.
NOTE:
The Vehicle Theft Security System (VTSS) / Vehicle Theft Alarm (VTA) must be enabled once the BCM has been reprogrammed.
27.
Enable VTSS / VTA.
