Grand Cherokee 2WD V8-4.7L VIN J (2004)
Front Door Hinge: Service and Repair
HINGE
REMOVAL
NOTE: The hinges may be removed and replaced one at a time to make the door fit adjustment easier.
1. Open and support door with a suitable lifting device.
2. Using a grease pencil or equivalent, mark the hinge location.
3. Disconnect the door wire harness.
Fig. 7
4. If replacing both hinges at the same time, remove the bolts and disconnect the door check from the a-pillar. (Fig. 7)
NOTE: The epoxy coated washers should not be removed from the hinges. If the washers are removed the door may have to be re-adjusted.
