jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Passenger Assist Handle > < Headliner|Service and Repair|Page 7623
Page 3
background image

INSTALLATION 

1. With the aid of an assistant, position the headliner in the vehicle.
2. Connect the sunroof drain hoses, if equipped.
3. Connect the sunroof harness, the rear wire harnesses, and the washer hose at the a-pillar and at the liftgate.
4. Roll sunroof weld edge back over headliner edge.
5. Install the roof rail assist handles.
6. Install the sun visors.
7. Install the overhead console, if equipped.
8. Install the rear cargo/dome lamp.
9. Install the d-pillar trim.

10. Install the c-pillar trim.
11. Install the upper b-pillar trim.
12. Install the a-pillar trim.
13. Connect the negative battery cable.

Passenger Assist Handle > < Headliner|Service and Repair|Page 7623