Grand Cherokee 2WD V8-4.7L VIN J (2004)
Trim Panel: Service and Repair
Cowl Trim
COWL TRIM
REMOVAL
1. Remove front door sill trim.
2. Remove screws attaching cowl trim to floor.
3. Remove plastic nut.
4. Grasp cowl trim and pull outward to separate from clip.
5. Separate cowl trim from vehicle.
INSTALLATION
1. Position cowl trim and press into place.
2. Install screws attaching cowl trim to floor.
3. Install plastic nut.
4. Install front door sill trim.
Door Sill Trim Panel
DOOR SILL TRIM
REMOVAL
Fig. 7
The sill trim molding is held in place with molded in snap retainers (Fig. 7).
1. Using a trim stick C-4755 or equivalent, carefully pry up one corner of the sill trim.
