Grand Cherokee 2WD V8-4.7L VIN J (2004)
6. Disconnect the seat wiring harness connector located under the seat.
7. With the help of an assistant, remove both front seats from the vehicle.
NOTE:
Perform all seat repairs on a clean work surface.
8. Remove the outer seat cushion plastic trim panel screws, disconnect the power seat switches and place the panel aside (Figure 1).
9. Disconnect the seatback wiring harness connectors located behind the plastic trim panel.
10. For vehicles equipped with power seat recliners, disconnect the seatback recliner motor connector.
11. Remove the two outboard side bolts and the one inboard side bolt on the seatback hinge (Figure 2).
12. Disconnect seatback heater connector and separate the seatback from the seat cushion.
13. Remove and save the inner seatback hinge black plastic bushing.
14. Turn the seat cushion upside down and unlatch the plastic "J" strap on the inboard side of the cushion.
15. Unhook the plastic clip on the outboard side of the cushion.
16. Remove the metal upholstery ring from front "J" strap.
