jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Trunk / Liftgate Weatherstrip > < Rear Door Inner Belt Weatherstrip
Page 1
background image

Rear Door Window Glass Weatherstrip: Service and Repair
Rear Door Outer Belt Weatherstrip

RDR OUTER BELT WEATHERSTRIP 

REMOVAL 

1. Remove trim panel.
2. Using a small flat blade, disengage tangs attaching outer belt weatherstrip to inner door panel.

Fig. 11

3. Lift weatherstrip upward and separate from door (Fig. 11).

INSTALLATION 

1. Position the weatherstrip onto the door flange.
2. Force the weatherstrip onto door flange and engage tangs. Continue rearward until it is seated on flange.
3. Instal trim panel.

Trunk / Liftgate Weatherstrip > < Rear Door Inner Belt Weatherstrip