Grand Cherokee 2WD V8-4.7L VIN J (2004)
Brake Caliper: Service and Repair
Disc Brake Caliper
Removal and Installation
REMOVAL - FRONT DISC BRAKE CALIPER
1. Raise and support vehicle.
2. Remove front wheel and tire assembly.
3. Drain small amount of fluid from master cylinder brake reservoir with clean suction gun.
Caliper Mounted
4. Bottom caliper pistons into the caliper by prying the caliper over.
5. Remove brake hose banjo bolt and gasket washers. Discard gasket washers.
6. Remove the caliper slide bolts.
Caliper Remove/Install
7. Remove the caliper from the adapter.
INSTALLATION - FRONT DISC BRAKE CALIPER
1. Caliper slide pins should be free from debris and lightly lubricated.