Grand Cherokee 2WD V8-4.7L VIN J (2004)
1. Position the magnetic seal guide Special Tool 8349-2 (Fig. 66) onto the crankshaft rear face. Then position the crankshaft rear oil seal onto the
guide.
2. Using Special Tools 8349 Crankshaft Rear Oil Seal Installer and C-4171 Driver Handle (Fig. 67), with a hammer, tap the seal into place. Continue
to tap on the driver handle until the seal installer seats against the cylinder block crankshaft bore.
3. Install the flexplate.
4. Install the transmission.
