Grand Cherokee 2WD V8-4.7L VIN J (2004)
Air Duct: Service and Repair
Floor Distribution Ducts Replacement
REMOVAL
1. To remove the driver side floor duct from the vehicle, remove the knee blocker panel for access to attaching screw See Instrument Panel System
for the procedures.
2. The passenger side floor duct fastener can be accessed under the right-center instrument panel.
Fig.5 Floor Ducts (Housing Removed)
3. Remove the screw that secures the floor duct(s) to the HVAC housing.
INSTALLATION
1. Attach the floor duct(s) to the HVAC housing.
2. Install the screw that secures the floor duct(s) to the HVAC housing. Tighten the mounting screws to 2.2 Nm (20 in. lbs.).
3. Install the knee blocker panel See Instrument Panel System for the procedures.
