Grand Cherokee 2WD V8-4.7L VIN J (2004)
5. Remove the screws that secure the left multifunction switch to the housing.
6. Remove the left multi-function switch.
INSTALLATION
1. Position the left multi-function switch onto the housing.
2. Install and tighten the screws that secure the left multi-function switch housing. Tighten the screws to 2.5 Nm (22 in. lbs.).
3. Reconnect the instrument panel wire harness connector to the switch connector.
4. Position the lower tilting steering column shroud to the underside of the steering column.
5. Install and tighten the screw that secures the lower steering column shroud housing. Tighten the screw to 1.9 Nm (17 in. lbs.).
6. Align the upper tilting steering column shroud to the lower shroud and snap the two shroud halves together.
7. Reconnect the battery negative cable.
