Grand Cherokee 2WD V8-4.7L VIN J (2004)
3. Pull the cluster bezel away from the instrument panel far enough to disconnect the wiring harness from the headlamp leveling switch. Disconnect
the headlamp leveling switch electrical connector.
4. Depress the switch retaining tabs and remove the switch from the cluster bezel.
INSTALLATION
1. Install the instrument panel cluster bezel to the instrument panel. Be certain headlamp leveling switch electrical harness is feed through the
corresponding hole in cluster bezel.
2. Connect the headlamp leveling switch.
3. Verify switch / system operation.
4. Install the headlamp leveling switch in the instrument panel cluster bezel by gently pushing straight in.
5. Connect the negative battery cable.
