Grand Cherokee 2WD V8-4.7L VIN J (2004)
Fuel Filter/Fuel Pressure Regulator Location
5
Disconnect fuel supply fuel return and fuel pressure lines at filter/regulator. Refer to Quick-Connect Fittings.
6
Remove 2 mounting bolts and remove filter/regulator.
INSTALLATION
1
Before installing filter/regulator, be sure all fittings are cleaned of all dirt and contaminants.
2
Be sure O-ring is positioned into fuel return fitting in filter/regulator.
3
Apply a small amount of clean engine oil to O-rings.
4
Position filter/regulator to body and install 2 bolts. Tighten bolts. Refer to Torque Specifications.
5
Connect 3 fittings. Refer to Quick-Connect Fittings.
6
Connect negative battery cable to battery.
7
Start engine and check for leaks.