Grand Cherokee 2WD V8-4.7L VIN J (2004)
Power Seat Switch: Description and Operation
Passenger Seat Switch
Six-Way Power Seat Switches
Ten-Way Power Seat Switches
PASSENGER SEAT SWITCH
Two different power seat switches are used on this vehicle, depending upon the optional power seat system installed in the vehicle. The six-way power
seats are each equipped with a switch featuring three switch control knobs ganged together on the outboard seat cushion side shield . The ten-way
power seats are each equipped with a switch featuring two knobs ganged together on the outboard seat cushion side shield.
The switch units for both power seat types are secured to the back of the seat cushion side shield with two screws. However, the control knobs for the
six-way power seat switch unit remain installed during switch unit removal and installation, while both knobs for the ten-way power seat switch unit
must be removed.
The individual switches in both power seat switch units cannot be repaired. If one switch is damaged or faulty, the entire power seat switch unit must
be replaced.
The power seat tracks of both the six-way and the ten-way power seat systems can be adjusted in six different ways using the power seat switches. The
ten-way system has the additional power seat recliner switch integral to the power seat switch and also has a separate, stand-alone switch to control the
power lumbar adjuster. See the owner's manual in the vehicle glove box for more information on the power seat switch functions and the seat adjusting
procedures.
