Grand Cherokee 2WD V8-4.7L VIN J (2004)
Wheel Speed Sensor: Service and Repair
Rear
REMOVAL
1. Raise and fold the rear seat forward. Then move the carpeting aside for access to the rear sensor connectors.
Rear Sensor Connector
2. Disconnect the rear sensor wire at the harness connectors.
3. Push the sensor wires and grommets through the floor pan holes.
4. Raise and support the vehicle.
5. Disengage the sensor wire from the axle and the chassis brackets and from the brake line retainers.
Sensor Mounting Bolt
6. Remove the sensor mounting bolt from the rear brake backing plate..
7. Remove the sensor from the backing plate.
INSTALLATION
